Compact, water-cooled waveguide-to-coax adaptor. Rectangular WR284 waveguide connection. 7/16" DIN Coax connection. SMA connection for integral reflected power measurement. This metal component is painted black.
Older vintage Astex 3-way microwave circulator in great physical condition. WR284 flange faces includes grooves for RF gasket material, but use of gaskets is not typically required. This type of circulator was typically used with Astex 1000W to 1500W microwave generators such as S-1000, S-1000i, S-1500, and S-1500i.
Uses modified YJ1600 6kW magnetron tube. Includes N-type connector below the waveguide launch. Goods have not been tested due to lack of a compatible power supply. Preliminary measurements on the magnetron tube suggest that it should be functional. Very good physical condition. Likely full description for Applied Materials OEM application: 0190-18178 / MAG HEAD ASSY, ETO 6KW MICROWAVE, ULTIMA / APPLIED MATERIALS AMAT
Relatively rare Astex waveguide component which includes a single directional coupler with integral signal processing board. The signal processing board includes 2 potentiometers which can be used for calibration. The component is equipped with a 9-pin male D-subminiature connector. WR284 waveguide section with 3-inch nominal length. Photos can be provided upon request.
3" long WR384 rectangular flange waveguide section. Aluminum component with black orange-peel finish.
Cline Innovations has inventory of Astex HV Cables of various types and lengths. Current inventory includes cables which fit AX2115, S-1500, S-1500i, A5000, and AX2040 microwave generators rated for as much as 10,000 Watts. Please don't hesitate to contact us if you are in need of a cable. Please consider sharing photos and length information for your existing cable (if you have one) in addition to images of the back panel of your power supply.
Microwave-tested by Cline Innovations. Astex 1.5kW microwave generator with both front panel control (local) and computer control (local) options. Previously used for corporate R&D. Rack-mounted power supply is in excellent condition and includes upgrades including larger (more reliable) high voltage cable & connector design.
Older vintage Astex WR284 waveguide component with integrated microwave coupler. Cline Innovations notes indicate that the standard factory-set "pick-up" for this coupler type is 50dB. Commonly used with Astex S-1000, S-1000i, S-1500 and S-1500i microwave generators. The coupler has an SMA connector which is typically mounted to an Alan Industries Diode.
Pre-owned manual 3-stub tuner equipped with WR284 rectangular waveguide and precision dials. This tuner design is intended for use with 2.45GHz microwaves. Astex sold tuners of this type for use on Astex generators rated for outputs of up to 5kW. Actual rating can be clarified at the time of sale based on your application details. The goods can be used on Astex (now MKS Instruments) as well as other brands of microwave generators with waveguide output including WR284, WR340, WR430. Refurbished as needed to ensure mechanical and electromagnetic functionality. These dials can age or get jammed due to impact. Cline Innovations replaces dials and components as needed during refurbishment. Other sellers may not.
Astex WR340 black-painted aluminum waveguide component with 2 integrated directional couplers. Each coupler is equipped with an N-type connection for power measurement. The couplers are oriented in opposite directions so that one can measure forward power and the other can measure reflected power. This part was last calibrated on 1-6-14 and likely needs recalibration. Cline Innovations may be in a position to coordinate recalibration at the time of sale. The lower right side of photo 1of3 shows that some paint scuffing has taken place on the outside of the waveguide. This is a superficial blemish and the item is in Very Good physical condition.
Cline Innovations has inventory of hardware related to the Astex AX2040 microwave generator. Please don't hesitate to contact Cline Innovations if you are in need of components, magnetron tubes, or are seeking a complete generator set.
Water-cooled and air-cooled remote magnetron head. Equipped with waveguide arc detector. WR340 output waveguide.
